Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

To drop or deny

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

To drop or deny

L4 Transporter

I found some best practices documentation on the fuel group site and they recommend drop over deny.  So I would be interested to see how people are configuring their fire wall more drops or denies and why?

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

A drop is silent, you simply discard the packet and don't tell anyone about it. This is great for most siatuations as you don't generate more traffic on your network and outsiders who may potentially be scanning you are non the wiser

 

A deny sends a notification to the sender that something happened and their packet was rejected

This could be helpful in providing a 'friendly' user experience as some applications will be able to pop up an error message telling the user their connection was rejected (instead of timing out, causing the user to have to wait and possibly keep trying), and tell applications to stop trying to connect.

 

My inbound rules are all drop while my outbound ones are deny (for rules that only trigger on App-ID, eg. "block ftp", you can also pick from 'reset-client', 'reset-server' and 'reset-both' depending which ones are 'internal' and deserve a notification)

 

I wrote a couple things regarding this, fyi:

https://live.paloaltonetworks.com/t5/Tutorials/Configurable-Deny-Action/ta-p/76613

https://live.paloaltonetworks.com/t5/Featured-Articles/DotW-reset-server-reset-client-or-silent-drop...

 

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

View solution in original post

6 REPLIES 6

Cyber Elite
Cyber Elite

A drop is silent, you simply discard the packet and don't tell anyone about it. This is great for most siatuations as you don't generate more traffic on your network and outsiders who may potentially be scanning you are non the wiser

 

A deny sends a notification to the sender that something happened and their packet was rejected

This could be helpful in providing a 'friendly' user experience as some applications will be able to pop up an error message telling the user their connection was rejected (instead of timing out, causing the user to have to wait and possibly keep trying), and tell applications to stop trying to connect.

 

My inbound rules are all drop while my outbound ones are deny (for rules that only trigger on App-ID, eg. "block ftp", you can also pick from 'reset-client', 'reset-server' and 'reset-both' depending which ones are 'internal' and deserve a notification)

 

I wrote a couple things regarding this, fyi:

https://live.paloaltonetworks.com/t5/Tutorials/Configurable-Deny-Action/ta-p/76613

https://live.paloaltonetworks.com/t5/Featured-Articles/DotW-reset-server-reset-client-or-silent-drop...

 

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

@reaper

Don't fear the reaper !! So I guess it good for load on your firewall and stretches the days of logs out but could reduce information

yes there are many pages on this stuff...

 

we opted for similar to @reaper.

untrust to trust... drop

trust to untrust, mostly drop but with a few overlapping policy denies for specific hosts and users

 

for trust to untrust diagnostics, deny (block all policy session start... not logging to paranormal) is a must, as and when required..

i prefer this to messing around with the default zone policies...

@Mick_Ball

Are you referring to the zone protection policies when you say default zone policies?

@jdprovine..

 

No sorry...

 

the intrazone-default and interzone-default security policies .

you can overide these and enable logging but i prefer to use my own policy to "block all" from my test PC IP address.

 

if i see any traffic using this policy, then i know one of the many above it is not working properly.

if you get my drift...

Great info as always @reaper

  • 1 accepted solution
  • 37631 Views
  • 6 replies
  • 1 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!