08-22-2017 11:30 AM
Hi, I have just configured my PA 500 and I set up the management IP to be 10.2.82.3/24. I connected the PA 500 to a switch that has VLAN 80 (10.2.80.x) and VLAN 82 (10.2.82.x) my laptop is ip'ed 10.2.80.40/24, from the laptop I can ping 10.2.82.1 (default gateway for the management vlan), but I can not ping 10.2.82.3. I consoled into the PA and I am able to ping from the PA to 10.2.82.1 and 10.2.80.1, but I am not able to ping my laptop 10.2.80.40.
I do not understand what went wrong. Can some please assist me with this?
08-22-2017 01:32 PM - edited 08-22-2017 02:14 PM
Hi,
Ping simply can be disabled on the mgmt interface on PA as well as your PC software firewall could block any incoming ICMP requests. Do you have ARP entry in PA ARP table of your PC ip address? If yes, did you try to access PA mgmt interface ip address over the https from your PC? If not, then double check VLAN tagging on the switch ports.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
