10-17-2021 10:39 PM - edited 10-20-2021 09:44 PM
We are in the process of migrating our DMZ servers out from behind an ancient ASA to our Palo. I pulled a test webserver over to make sure my NAT was set and to trial out some rules.
For the most part everything is working but I can't ping out from a server in our DMZ zone. We are using GlobalProtect for our VPN and from the vpn zone I can ping the server in our DMZ. From the DMZ I can ping my laptop in the VPN zone. What I can't do is ping out to google or anywhere else. I can browse to google and the internet from the new DMZ just fine but I can't get ping working.
I have enabled a management profile allowing ping on both the DMZ interface and the WAN interface. Zone protection is not used.
I have a security rule allowing ping to LAN, DMZ, VPN & Outside from LAN, DMZ & VPN. I can see in the monitoring tab where the allow ping security rule is picking up the ping from the server to shagle and allowing yet, yet ping will not return anything when run from the server. I just get request timed out.
I can't help but feel like this is something super obvious...
This is such a small thing but really would like this working before I move forward with this project.
10-18-2021 08:27 AM
Hello,
Check the logs to see why this was blocked or not allowed? Also do you have a NAT from the new zone out to the internet?
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
