Unable to See Rule in Output of Running Config

[c89217]

Hello.  I have read only access to our firewall and in the past could do the command show config running and see all the rules in use.  Now, I don't see near as many as used to.  If I go to the web GUI and Monitor tab for instance, there is a rule named APP34-ROW-09-PAN that's actively allowing or denying traffic.  If I search this in the cli output of the running config, I find no trace of it.  Is there some other command aside from show config running that'll show all the rules in place on the firewall?

[SutareMayur · Accepted solution]

Hi @c89217 , 

Quick questions -

1. Is it panorama managed gateway?

2. Do you have multi vsys on the firewall?

[c89217]

SutareMayur

Hello.

Yes, it appears to be Panorama managed as two servers are specified for Panorama Servers on the Device tab.

Yes, there are multi vsys on the firewall.

[c89217]

I believe I found how to see the rules.  On the CLI I set the vsys I want to be into  set system setting target-vsys vsys2

then use command show running security-policy

[SutareMayur]

@c89217 

Glad to know that you are able to see the rules.

I was also suspecting same in case of multi-vsys but wanted to confirm first if you're running same.