03-23-2011 05:40 AM
Upgraded the active 2050 to 3.1.8.
Passive 2050 now has a PAN-OS Version mismatch.
I cannot reach the passive firewall through the management port anymore, cli or browser.
Is there a procedure for this?
Thanks.
03-23-2011 05:56 AM
You may need to use the console port to see what's being displayed.
03-23-2011 06:13 AM
Heading down there now......
03-23-2011 07:26 AM
No idea where to go from here.
I put high availability into suspend state, still can't connect with browser.....
03-23-2011 09:52 AM
Hello bill !
try to reboot your palo-alto!
verify your configuration with your console port ( ip on the management interface)
if doesnt work try to connect directly on the MGT port! not an interface configuring with a profile management!!!!!!
If doesnt work You can try to do a reset factory and reconfigure your palo-alto ( ip management and cluster only and synchronise config with master)
Alex
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
