Showing results for 
Search instead for 
Did you mean: 


L2 Linker

I need to update my firewall from 8.0.17 to the latest release of 8.1.  In the past I was instructed to first upgrade to the base release for the PANOS, and then install the maintenance release on top.  Is that still the way it should be done.? If I remember correctly, the base has to be there before you can upgrade to the maintenance release.


If this is the case, do you recommend leaving the base in place for awhile before updating to the maintenance release or should it be applied as soon as the base is installed?


Cyber Elite
Cyber Elite


The recommended upgrade path for you wold be the following:

8.0.17 -> 8.0.20 (Download, Install, and Restart)

8.0.20 -> 8.1.0  (Download, and Install)

8.1.0 -> 8.1.11  (Download, Install, and Restart) 


While you technically only need to install the base image (8.1.0) and don't necessarily need to reload the firewall until you install 8.1.11, I always recommend restarting and booting into 8.1.0 if you have a maintenance window that allows you enough time to do so.  

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!