12-16-2025 11:39 PM
I have setup all required steps, for user id mapping using user-id agent.
the agent is working, I did all required configuration as per the guide line, and it is connected but the log is still empty
the user-id agent log is working and have the data. but from firewall side it is not.
12-17-2025 08:20 PM
@Tqpharma EZPassFL login wrote:
I have setup all required steps, for user id mapping using user-id agent.
the agent is working, I did all required configuration as per the guide line, and it is connected but the log is still empty
the user-id agent log is working and have the data. but from firewall side it is not.
Hello @Tqpharma,
If the User‑ID agent log shows data but the firewall log is empty, check that the firewall is properly receiving mappings — verify the agent is added under *User Identification* on the firewall, ensure the service account has the right permissions, and confirm the agent‑to‑firewall connectivity (port 5007). Without that link, mappings won’t populate in the firewall.
Best Regards,
Mabel Brown
Best Regards,
Mabel Brown
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
