10-25-2017 05:38 AM
So I made the mistake of creating static routes that specify an exit interface. So now I have traffic coming into the firewall and then going out a different interface to get to other networks, rather then having that traffic hairpin back down my AE interface. So I have kind of a loop going on. So my quesiton is: Can I remove the exit interface value from the static routes and shutdown the interface that the traffic is going out and it will automatically hairpin down my AE interface based on ARP for the next hop address?
10-25-2017 02:34 PM
Hello,
I think you can just change the virtual router config. I would obviously do it after hours in a maintenance window to reduce any potential impact.
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
