05-28-2020 11:25 AM
Hi,
I am fairly new to this firewall PA-220R. I have a workstation that has 5 NIC's. One is on a 192.168.100.0/24 range and the other is on a 192.168.130.0/24 range. The 100.0 range can reach the firewall. I have a device plugged into port 4 of the firewall with an IP of 192.168.130.100. How can I setup a route or access the device in the 192.168.130.0/24 range from the workstation?
05-28-2020 06:09 PM
This sounds like your workstation simply isn't routing the traffic properly. Most systems would have your 192.168.130.0/24 NIC route the traffic for 192.168.130.0/24 destinations unless told not to; you'll want to verify that your NIC is setup with the firewall as the gateway and that your workstations local routing is actually setup properly.
05-28-2020 06:09 PM
This sounds like your workstation simply isn't routing the traffic properly. Most systems would have your 192.168.130.0/24 NIC route the traffic for 192.168.130.0/24 destinations unless told not to; you'll want to verify that your NIC is setup with the firewall as the gateway and that your workstations local routing is actually setup properly.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
