- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
10-18-2023 05:50 AM
Hi All,
I'm looking to update my VM-300 firewalls from 10.1.5-h2 to 10.2.5
I've tried to work out the install steps but I'm a bit confused, I assume I need to do the following?
update from 10.1.5-h2 to 10.2.0
then update from 10.2.0 to 10.2.5
Also, I assume the link below is where we go for preferred release guidance?
Support PAN-OS Software Release Guidance | Palo Alto Networks
Thanks
Jake
10-18-2023 02:58 PM
Hello @Jake_Morley
to upgrade to 10.2.5, you should take below steps:
Download and install latest preferred release (10.1.10-H2 as of this writing), then reboot.
Download 10.2.0, then download and install 10.2.5, then reboot.
Here is link for official upgrade guide: Determine the Upgrade Path to PAN-OS 10.2
The link you mentioned is correct reference to confirm preferred PAN-OS version.
Kind Regards
Pavel
10-18-2023 02:58 PM
Hello @Jake_Morley
to upgrade to 10.2.5, you should take below steps:
Download and install latest preferred release (10.1.10-H2 as of this writing), then reboot.
Download 10.2.0, then download and install 10.2.5, then reboot.
Here is link for official upgrade guide: Determine the Upgrade Path to PAN-OS 10.2
The link you mentioned is correct reference to confirm preferred PAN-OS version.
Kind Regards
Pavel
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!