VPN error message after upgrading PAN-OS to 10.1.10-h2

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

VPN error message after upgrading PAN-OS to 10.1.10-h2

L0 Member

Hi,

 

After upgrading to firewall PANOS version to 10.1.10-h2 i started seeing below error message logs under monitor > system logs. On the previous PAN-OS version this error was not observed.

However, in reality tunnel is up & running, only thing on system logs it shows up & down. After disabling the tunnel monitoring, tunnel up-down logs stop showing under system log.

But i need to enable the tunnel monitoring again because i need to monitor the VPN status and want to know if there is any alternating solution to stop the tunnel up-down logs with tunnel monitoring on.

 

Dhirajjagdale_0-1711126078339.png

 

Regards,
Dhiraj

1 REPLY 1

Cyber Elite
Cyber Elite

Hello,

 

While this is not listed in the known issues of 10.1.10, it is listed in the addressed issues of 10.1.11:

Claw4609_0-1711137360869.png

So out of curiosity would these conditions apply to your environment?

 

PAN-OS 10.1.11 Addressed Issues (paloaltonetworks.com)

 

  • 502 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!