08-25-2011 06:29 AM
Are there any specific limitations in numbers of policies/sessions/tunnels/routes/etc in a vsys ?
08-25-2011 08:19 PM
@Bart.Jocque:
The sum total of the vsys configurations cannot exceed the max # of policies/sessions/tunnels/routes/etc for the device.
-Benjamin
08-25-2011 08:09 AM
The "show systen state" in the lines "cfg.general.max...." can give you information about the limits of your system.
08-25-2011 08:17 AM
Thanks for the tip, a lot of usefull info indeed in 'show system state'
But these are "box" limitations , I'm looking for specific limitations inside a VSYS , if any
( cfr Netscreen)
08-25-2011 08:19 PM
@Bart.Jocque:
The sum total of the vsys configurations cannot exceed the max # of policies/sessions/tunnels/routes/etc for the device.
-Benjamin
01-08-2017 01:45 AM
Firewall is in HA with 5 vsys on each and if any vsys out of 5 on primary goes down, then failover will happen and all 5 vsys tarffic will get shift over to passive member.
No vsys specific HA
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
