Vulnerability in TCP packet

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Vulnerability in TCP packet

L1 Bithead

Hi guys ,

Is it possible for PAN to block asynchronous tcp and RST packets to prevent attack ?

Regards,

Bryan

3 REPLIES 3

L5 Sessionator

Hi,

Have you try with Security profile configured on security rule ?

V.

L6 Presenter

Hi...By asynchronous, I assume you mean TCP packets that do not follow the TCP 3-way handshake.  The default behavior of the PA is to perform stateful inspection and will drop packets that did not conform to the 3-way TCP handshake.  Here's how to enable/disable this feature: How to Set the Firewall to Reject non-Syn First Packet?

Thanks.

L5 Sessionator

PANFW can act upon malicious TCP packets ( used for port scans and  reconnaisance ) using the zone protection profile as shown below.

zone protection-2.JPG.jpg

zone protection-1.JPG.jpg

As I understand the zone protection is for incoming traffic.

That is if you want to protect DMZ then you should apply your zone-protection on the Untrust zone (facing Internet) and the Trust zone (facing your LAN - if you wish to protect from inside threats aswell (for example an overtaken client is being used to DDoS/DoS your DMZ devices)).

  • 2088 Views
  • 3 replies
  • 0 Likes
  • 101 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!