Vwire with WCCP

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Vwire with WCCP

L2 Linker

Hi

I am planing put PAN Device on vwire mode  just before traffic reach their Proxy solution. Traffic redirect using WCCP web traffic from Cisoc switch to Cisco Ironport.The Proxy device only has one NIC interface.In this secenario What we will see? Only WCCP traffic, or Web traffic, from Switch to Proxy, and Web responses from Proxy to Switch, where only Proxy IP is showed as source IP or can wee see all the user traffic.

Thanks

Shabeer

3 REPLIES 3

Retired Member
Not applicable

I haven't worked with WCCP myself, but we do have app-ids for web-browsing, http-proxy and wccp. So one recommendation you can do is to start with allowing these applications through and then check your traffic logs. That should tell you what applications in particular you should be concerned with and then apply your rules accordingly.

Hope this helps.

Regards

-Richard

Hi

Thanks richard

My concern is that if i position the Firewall between WCCP traffic(Here core and ironport), can i see the other web traffic.We need confirmation on this Any one tried this

Thanks

Shabeer

Hello!

When router redirects traffic to proxy using WCCP, encapsulates packets in GRE so you will only see GRE traffic.

Best regards,

Maja

  • 3239 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!