Showing results for 
Show  only  | Search instead for 
Did you mean: 


L1 Bithead

Hello i have the below design

Internet Cloud ------------------> Cisco ASA -------VWire1----------->PA----------VWire1---------->Core Switch

PA ----------------------->SWitch-----------------------  >WAN Router

PA                                          ------------------------>other WAN Router


in this scenario i will configure VWire1 from ASA and Core and VWire 2 from PA to Switch and from PA to WAN Router, VWire 3 from PA to Switch and from PA to other WAN Router and configure destination NATing.

till now i don't try this scenario in LAB i don't know is it consider best parctice or better if i use L3 from PA to switch ( WAN VLAN , other WAN VLAN).

and if i use V Router i can use only one VRouter or 3 VRouters.


L6 Presenter

if you will not use vpn functions vwire is Ok.

will you remove cisco or it will stay ?

L5 Sessionator


Just keep i mind that Vwire not support VPN, routing or device management on vwire interface.

If it's ok for you .... please go.

By default, allow all Vlan and be transparent to multicast.


Hope help.


  • 2 replies
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!