Showing results for 
Show  only  | Search instead for 
Did you mean: 


L1 Bithead

deploying PA-3250.. int 1/2 and 1/1 are configured as Vwire.. however, interfaces are showing down.. 


Cyber Elite
Cyber Elite


Have you verified speed, duplex, and link state configured on the interface? That's where I would look and see if you're getting any sort of link light on the interface itself.


FYI, I wouldn't recommend sharing your serial number on a public forum. 

That was an error.. how can we delete it..

no link lights on the interfaces...Capture.PNG

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!