XML User ID

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

XML User ID

L0 Member

One of our engineer setup XML to pull the user id and ipaddr mapping, which works with no problem. The problem is he left the organisation and we are not able to determine the source from where the input is coming into the firewall. The log on the PAN does not tell you exact source ipaddr.

irtual System
vsys1
Timeout
2700
Data Source
xml-api
Source Name
XMLAPI
Source Type
 
Factor Type
 
Factor Completion Timestamp
2019/04/07 22:19:23
Factor Number
1
Generate Time
2019/04/07 22:19:22
Begin Port
0
End Port
0
1 REPLY 1

Cyber Elite
Cyber Elite

@fkizhuvara,

Should be easy enough to look at traffic logs going to the management interface of the firewall to determine the oddball machine. Adversly you should have permitted-ips configured on any management interface, which would allow you to look only at the machines that are actually allowed access to the device. 

  • 2299 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!