DNS logging with globalprotect

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

DNS logging with globalprotect

L0 Member

Hi,

 

Wondered what people's experience/advise is on the following. We have palo alto VM series in azure which we are using globalprotect on. At the moment I am NATing the globalprotect VLAN to the IP address of the firewall, but in doing this I am finding that the DNS log traffic from our DCs is limiting in that all of the requests are appearing to be from the firewall as opposed to the client (obviously). Is there a way to get globalprotect or the firewall to log the client DNS requests? Ideally I would turn off NAT but can't do that at the moment.

 

Thanks

 

Dan

2 REPLIES 2

Cyber Elite
Cyber Elite

On the firewall you should be able to see source usernames associated to all incoming sessions, you should also be able to set up log forwarding for this traffic of interest to a syslog server containing all the source users

 

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

But how do I see the DNS record that the user has requested?

  • 2056 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!