11-25-2021 08:38 PM
Hi,
PA-460 with PAN OS 10.1.1, only allows me to enter a max user value of 20 in the GP clientless VPN config. Palo Alto documentation says it supports 200.
Is there anyway to change this or is this a bug?
https://www.paloaltonetworks.com/products/product-comparison?chosen=pa-450,pa-460
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PPBCCA4
11-26-2021 01:04 PM
While I don't see any addressed issues mentioned in the release notes that seem to match this issue, if you're going to be running 10.1 I would recommend staying on the preferred release (or even the latest if you have a lab device to run validation on). Install 10.1.3, which is the current preferred release, and see if the issue is still present. If it is, I would open up a support case so you can get the bug validated and sent up to engineering.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
