PA-460 GP clientless VPN only allowing max users of 20

cancel
Showing results for 
Search instead for 
Did you mean: 

PA-460 GP clientless VPN only allowing max users of 20

L3 Networker

Hi,

 

PA-460 with PAN OS 10.1.1, only allows me to enter a max user value of 20 in the GP clientless VPN config. Palo Alto documentation says it supports 200.

 

Is there anyway to change this or is this a bug?

 

BenPrice_0-1637901452039.png

https://www.paloaltonetworks.com/products/product-comparison?chosen=pa-450,pa-460

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PPBCCA4 

 

 

1 REPLY 1

Cyber Elite
Cyber Elite

@Ben-Price,

While I don't see any addressed issues mentioned in the release notes that seem to match this issue, if you're going to be running 10.1 I would recommend staying on the preferred release (or even the latest if you have a lab device to run validation on). Install 10.1.3, which is the current preferred release, and see if the issue is still present. If it is, I would open up a support case so you can get the bug validated and sent up to engineering. 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!