Just curious is anyone using the venafi agent to discover certificates on all servers? Venafi agents are good and bad. They are good atdiscovering(everything), yes, I mean EVERYTHING. However, they introduce a lot of noise and you need a good strategy to isolate only the objects that you care about. You also need a good strategy if you are going to incorporate provisioning since now you will need to set that up on a schedule as Venafi agents dont support a push from the console (without delays). My personal recommendation is that you should use a config management tool to discover all of relevant objects and then send that to Venafi and solution via an agentless deployment. Venafi support, if you are looking at this, BigFix or other config management tool integration would be extremely helpful. If not, you are going to end up with a large inventory that is no more than a glorified file system scan with no much relevant data that will be even more painful as the inventory grows. Venafi agents are good at what they are tasked to do, that is, discover what you tell it to do.