How to manually trigger eventid 00130003

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to manually trigger eventid 00130003

My goal is to run log script which sends an event to servicenow when a certificate is about to expire.

This should happen based on eventid 00130003

Is there a way to trigger this event manually or else change the schedule somewere since this only seems to happen once per day at 12pm?

1 accepted solution

Accepted Solutions

I specifically wanted the messages about expiring certificates to be sent: 0x130003 and 0x130004.

Changing the time in the UI only worked once and only works hourly.

However, thanks to support, there is a way to trigger the daily tasks at any moment you want, as often as you want. Use this command-line tool:

C:\Venafi\Platform>\tpptool.exe -da -u <useraccount> -pa <password> -n

Be aware that emails will also be sent, so it's probably not a good idea to run this in a production environment as you might spam your users with emails.

Additionally, it seems that once you run the tool, it sets a new time for the daily tasks to run automatically at that time, even though the UI continues to show 12:00 AM.

View solution in original post

7 REPLIES 7

L3 Networker

Hi @Ronald Van Den Berg​. It looks like your message got cut off, can you update/finish it?

Thanks Greg for bringing that under my attention. it wasn't much that was missing but now its complete.

L3 Networker

By default these execute at 12a. You can change the value by going to Policy Tree -> Platforms drop down -> Platforms tab -> Engine tab -> Global Options -> Run daily tasks at. If you do change this, it is recommended to run overnight when the system is less utilized.

Thank you Greg, that gives me at least an opportunity to test it more than once per day. Unfortunately the time you can select there only allows hourly schedules but at least its better than having to wait 24 hours.

L2 Linker

@Ronald Van Den Berg​  good day sir, I hope you're doing well! I use this eventid to schedule anything for an hourly job, 002A0006

L4 Transporter

Hello @Ronald Van Den Berg​ 

 

Have you received an answer to your question? If so, we kindly encourage you to share it with us.

Your insights could be valuable to other community members in the future.

 

Thank you, Isar.

I specifically wanted the messages about expiring certificates to be sent: 0x130003 and 0x130004.

Changing the time in the UI only worked once and only works hourly.

However, thanks to support, there is a way to trigger the daily tasks at any moment you want, as often as you want. Use this command-line tool:

C:\Venafi\Platform>\tpptool.exe -da -u <useraccount> -pa <password> -n

Be aware that emails will also be sent, so it's probably not a good idea to run this in a production environment as you might spam your users with emails.

Additionally, it seems that once you run the tool, it sets a new time for the daily tasks to run automatically at that time, even though the UI continues to show 12:00 AM.

  • 1 accepted solution
  • 104 Views
  • 7 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!