Client ikemgr phase 1 failure

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Client ikemgr phase 1 failure

L1 Bithead

Dear All,

 

Below is summary of issue and resolution.

 

1. We added a new firewall to HA set-up.

2. HA was established properly.

3. While doing config sync from active to passive it was falling with error Client ikemgr phase 1 failure

 

Resolution:

Upon deep dive it was figure out that Master key between Active and passive firewall is mistmached.

Push the correct Master key from Panorama to Passive firewall.

Issue is fixed.

 

Tip:

If Panorama is running in the environment, best practice is to go to Panorama-> Managed Devices-> Summary  

compare all the fields and check the status of all fields are ok or not.

 

While adding a , config sync was failing  from active to passive firewall.

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Good info and I am glad you resolve your issue.

Help the community: Like helpful comments and mark solutions

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Good info and I am glad you resolve your issue.

Help the community: Like helpful comments and mark solutions
  • 1 accepted solution
  • 3368 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!