How to Set Different Source IPs for Specific Syslog Servers

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

How to Set Different Source IPs for Specific Syslog Servers

L0 Member

Hello,


I am currently using PAN-OS on a PA-3420 device and looking for a way to configure it to send logs to specific Syslog servers using different source IP addresses. The standard Service Route configuration seems to use the same source IP for all Syslog servers, but I need to set different source IPs for different Syslog servers.

Here is the configuration I am trying to achieve:
- Use source IP address 10.100.1.1 for Syslog server A (10.110.1.10)
- Use source IP address 10.200.1.1 for Syslog server B (10.210.1.10)


Could you please provide detailed steps to accomplish this using either the CLI or GUI?

Thank you.

1 REPLY 1

L0 Member

Hello,


The following link provided a helpful answer:
Syslog Forwarding to Different Log Server

I followed the steps mentioned in the solution and successfully achieved the desired configuration. Thank you to everyone who contributed!

Best regards.

  • 400 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!