Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
07-19-2022 08:54 AM
Hello Guys,
Need some suggestions, Paloalto 5220 or say 3220 while deploying I can see yellow LED in PWR but every other LED's are green.
In this document it says it will either be green for ON and for no power it will be OFF but i can see yellow.
i saw back panel fans are working fine no error on environmentals also Backpanel led's are green.
Is it normal or need to check with TAC ?
07-19-2022 12:00 PM
Perhaps its a failing LED. I see the right side looks a liitle yellowish. Maybe the color is just distorted. Can you power cycle the device? I see you have an HA pair, if its the inactive pair bounce it. If it is active, switch to passive and then reboot. Interested to see what it could be.
07-19-2022 01:42 PM - edited 07-24-2022 08:02 AM
Hi Dan,
I have rebooted several times since the time of deployment and it is the same since i unboxed it.
I have unboxed 3 firewalls in last 3 month 3220 5220 and 5250 this case is same in all 3 devices.
maybe LED colour is distorted.
07-27-2022 05:21 AM
I would open a case up if you are concerned it is not functioning correctly.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
