Multiple vsys share one pair of WAN circuits?

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Multiple vsys share one pair of WAN circuits?

L0 Member

I have 4 vsys that are currently using individual ports to connect to the WAN circuits. I need to free up ports for additional vsys, and would like a shared circuit port for the multiple vsys to use. I've tried a layer 3 interface with sub interfaces, one for each vsys, tagged vlans 11,12,13,14 for example, trunked to a switch, but I'm getting packet loss with that method. Is there another preferable way to configure this to share a single interface? 


Cyber Elite
Cyber Elite

Hi @ZNetEng ,


You could try a shared gateway ->


Another idea is to use QoS to limit the bandwidth on the sub-interfaces, but I can't remember if you can apply QoS to sub-interfaces.





Help the community: Like helpful comments and mark solutions.
  • 1 replies
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!