07-25-2022 12:30 AM - edited 07-25-2022 12:37 AM
Hi everyone,
A good day to all!
I encountered the following when upgrading the physical PA-5250 Firewalls from 10.0.10-h1 to 10.1.0 and from 10.1.0 to 10.1.5-h2.
Such that the Log Quota is reflected 0MB and there were no logs there were displayed (E.g. System Logs). When we enter the command ‘show system raid status’ on CLI, we saw that the spare disk was in a to be repaired state. Only when it displayed ‘Done checking the integrity of the RAID log details’ and started rebuilding then the logs start to appear and values were reflected on the Log Quota.
Is this a known issue for PA-5250 model as we upgraded the PA-3220 as well but there isn’t any occurrence of the above mentioned issue.
As far as I know PA-3220 will not display any RAID-related info as this model does not support raid.I suspect this as a FSCK. The firewalls are being managed by Panorama (PAN-PRA-25 ).
Can someone enlightened me what happened? Does traffic passes through the firewall if it's performing such Integrity checks?
Cheers,
Renz
01-15-2024 06:59 PM - edited 01-15-2024 07:55 PM
@PMCHelpdesk I am not sure if you can avoid as this happens only when you upgrade to 10.1 or higher.
Happen to me on PA 5220. Seems most common on PA 5200 series. Which PA you have?
I Did upgrade on 3 Pair if firewalls last year but issue occur on 1Pair only.
Please check with your SE
Regards
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
