Content translations are temporarily unavailable due to site maintenance. We apologize for any inconvenience.
04-08-2024 08:13 AM
When we booted up the firewall we're getting an error that AutoCommit failed to complete. This was seen while mounting the raid partitions, specifically /dev/sd9. After referring the documentation existing on Palo Alto community, in the link https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u000000wkxPCAQ&lang=en_US%E2%80%A...
The problem is that, in the documentation, we see that the status should be showing spare rebuilding. But it shows us the status Active Sync. We have consulted the TAC as well, but to no luck. A screenshot has been attached with this post that describes the error we see.
Any help would be greatly appreciated. Thanks in advance.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
