PBR using Route failover

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PBR using Route failover

L1 Bithead

Hi All,

 

Our organisation purchased two Mpls link and wants to configure an PBR like such

 

1) All intranet traffic like dns, ntp shoud go via primary MPLS

2) All internet related traffic should go via Secondary MPLS

3) In case Primary MPLS goes down all traffic (intranet and internet) should go via Secondary MPLS and vice versa.

 

Please let me know how i can achieve this. Attached Sample Diagram.

 

 

 

6 REPLIES 6

L1 Bithead

PFA diagram

L5 Sessionator

Are you talking PBR on the routers or PBF on the firewalls?

L1 Bithead

Pbf on firewalls alongwith route redundancy using static route monitoring 

If you really want to use PBF on the PA, you could put RFC 1918 toward primary and negate RFC1918 toward secondary. You'll need a default toward each of them as well for the failover to work.

Could you pls elaborate with statement 'you could put RFC 1918 toward primary and negate RFC1918 toward secondary'. if possible pls share any relatable link.

 

thanks in advnace.

  • 823 Views
  • 6 replies
  • 0 Likes
  • 38 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!