12-12-2022 02:21 AM
All,
Recently our production PA-440 model firewall went into maintenance mode, and post rebooting it came back and all started working fine without any issue.
After few minutes of firewall came up, it stopped generating and forwarding (traffic, Threat and configuration) logs to panorama.
we did restart log-receiver and mgmt of the firewall , but still the issue didn't fixed. After 2 days of issue we found 2 logs of traffic logs has been generated and sent to Panorama. But after that no more progress , still the issue is persisting.
Any suggestion on the same.
12-12-2022 08:04 AM
Is firewall mgmt and Panorama in same subnet?
If not then do you see connection attempts in traffic log?
Check ms log in firewall
less mp-log ms.log
tail follow yes mp-log ms.log
12-14-2022 01:29 AM
Just to update on the case, as soon as we cleared few sessions in session browser, we could see the logs in firewall same was forwarded to Panorama as well.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
