Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
10-18-2023 02:18 AM
Hello,
I'm trying to configure a site-to-site vpn with between two organizations.
Our internal IP range is conflicting with the other organization network, so we are trying implement Source and Destination NAT
The VPN tunnel is up, but I'm struggling to NAT Source and Destination.
Route : 172.25.255.0/29 via Tunnel.50
The NAT policy Configured as below.
Tunnel Interface
Session Flow
Traffic Logs
10-20-2023 08:36 AM
I have a similar problem but the NAT is on the client's peer.
We see traffic but access to hosts does not work.
10-20-2023 09:43 AM
Your traffic is not sent into tunnel because post-nat IP matches to your local subnet and it is routed to trust zone.
You should set up NAT on both sides by applying SNAT and DNAT for the traffic on both sides.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
