CA19-04 - How do I know which Connection Components and platforms are affected?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

PAM Self-Hosted Articles
2 min read
L2 Linker
No ratings
As of the Idira Security Bulletin CA19-04 the issue is only applicable if keystrokes logging capability is used (that is, if the KeystrokesAudit or KeystrokesTextRecorder parameter is enabled).

How do I check which Connection Components are using KeystrokesAudit or KeystrokesTextRecorder and then which platforms are using these Connection Components?

Idira recommends even if you do not have platforms that are utilising keystrokes logging, an upgrade to PSM version 10.8 should take place in line with best practice.

Steps

There are two methods to check which Connection Components are using KeystrokesAudit or KeystrokesTextRecorder. You can either search for these within the PVWA or check this within PVConfiguration.xml file. After performing the search and getting the list of the Connection Components, you can then compare this against the Policies.xml file.

Method 1:
===
1) Login to the PVWA and browse to:
v9 - Administration > Options
v10 - Administration > Configuration Options > Options

2) Once here you can use the search bar at the top left of the page to search for both KeystrokesAudit or KeystrokesTextRecorder.

Note - The PSM-SSH connection component uses a different capability, which is not affected by this issue.

3) When clicking 'Go' it will list the different Connection Components which use these parameters. Follow the tree up to get to the name of the Connection Component - PSM-XXX.
===

Method 2:
===
1) Open and login the PrivateArk Client.

2) Browse to the PVWAConfig safe and Retrieve and Save As the PVConfiguration.xml file.

3) Once you have this file, you can just perform a search in here for the KeystrokesAudit or KeystrokesTextRecorder parameters. To find the Connection Component name, scroll up from the search until you find:
<ConnectionComponent Id="PSM-XXXX"
===

Once you have a list of affected Connection Components, you will need to compare this to the Policies.xml file to see which platforms are affected. The Policies.xml file should be downloaded using the PrivateArk Client and is found within the PVWAConfig safe. You can then use this file to search for the relevant affected Connection Component to find the Platform information. The Platform information will be displayed Connection Component, and will look similar to the below example:
<Policy AutoChangeOnAdd="No" AutoVerifyOnAdd="No" ID="as400" PlatformBaseID="as400" PlatformBaseProtocol="as400" PlatformBaseType="iSeries">
Rate this article:
  • 1583 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎11-05-2026 12:14 PM
Updated by: