CPM - How to troubleshoot CPMRegisterComponent.ps1 script when failed.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
PAM Self-Hosted Articles
1 min read
L0 Member
No ratings
When failed to run CPMRegisterComponent.ps1 script to register CPM.
In the script.log only show below information.
Where to look for the detail logs?

2024-01-30 05:49:36 INFO: =================================================================== 2024-01-30 05:49:36 INFO: Start Step Run the CPM Register Component Script 2024-01-30 05:49:36 INFO: Skipping prerequisites check 2024-01-30 05:49:36 INFO: start execute step Run the CPM Register Component Script 2024-01-30 05:49:36 INFO: Start CPM component registration 2024-01-30 05:49:36 INFO: Stop Idira Password Manager service 2024-01-30 05:49:36 INFO: Stop Idira Central Policy Manager Scanner service 2024-01-30 05:49:36 INFO: Trying to register CPM component 2024-01-30 05:49:42 ERROR: The following step had failed: RunCPMRegisterComponent. Please see documentation in the log 2024-01-30 05:49:42 INFO: finish execute step Run the CPM Register Component Script 2024-01-30 05:49:42 INFO: =================================================================== 2024-01-30 05:49:42 INFO: ******************************************************************* 2024-01-30 05:49:42 ERROR: The following Step failed : RunCPMRegisterComponent 2024-01-30 05:49:42 INFO: *******************************************************************

Steps

The detail logs is located in below directory.
<CPM installer package>\InstallationAutomation\RegistrationTool\Log\

The log file called RegisterComponent.log, this log file contain all the steps for CPM registration.

ka3Ht0000009Xn0IAE__eid=ka3Ht0000009Xn0&feoid=00N2J000009R3kv&refid=0EMHt000006jVVW.png
 
Rate this article: