How to set Perfmon counters for network issues?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

PAM Self-Hosted Articles
2 min read
L1 Bithead
No ratings
How to set Perfmon counters for network issues?

Steps

  1. Start-->Run-->perfmon.exe 
  2. Data Collector--> User Defined-->Right click-->New--> Data Collector Set 
  3. Select "Create manually" 
  4. Select "Create data logs" and check "Performance counter" 
  5. "Add" 
    1. In the upper left  window select Network interface 
    2. In the lower left  window select the interface/network card 
    3. In the lower left  window select "<All instances>" Click "Add" to see the selected (*) parameter in the right window.
    4. Click OK
  6. Sample interval= 15 sec 
  7. Finish 
  8. Open the data collector set properties and make sure there is no stop condition 
  9. Start the data set collector 
To stop the data collector and export the data:
  1. Stop the data collector set in the upper toolbar
  2. Go to the output path stated in the New data collector view and retrieve the .blg file.
Q:
How to set Perfmon counters for network issues?


A:
a. Start-->Run-->perfmon.exe 
b. Data Collector--> User Defined-->Right click-->New--> Data Collector Set 
c. Select "Create manually" 
d. Select "Create data logs" and check "Performance counter" 
e. "Add" 
* In the upper left  window select Network interface 
* In the lower left  window select the interface/network card 
* In the lower left  window select "<All instances>" Click "Add" to see the selected (*) parameter in the right window.
* Click OK
f. Sample interval= 15 sec 
g. Finish 
h. Open the data collector set properties and make sure there is no stop condition 
i. Start the data set collector 

To stop the data collector and export the data:
a. Stop the data collector set in the upper toolbar
b. Go to the output path stated in the New data collector view and retrieve the .blg file.
Rate this article:
  • 1618 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎04-10-2023 06:45 PM
Updated by: