PSM - How do I map local drives from a workstation when connecting via PSM?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

PAM Self-Hosted Articles
1 min read
L0 Member
No ratings

How do I map local drives from a workstation when connecting via PSM?

Steps

  1. Log on to the PVWA website as an administrator.
  2. Select Administration > Options > Connection Components > <the connection component you want to change> > User Parameters > AllowMappingLocalDrives
  3. Set Value to Yes.
  4. Set Visible to Yes to allow users to choose if they would like drives mapped or not for individual sessions.

Below is an example using the connection component named PSM-RDP:

ka3Vy000008vSZGIA2__eid=ka3Vy000008vSZG&feoid=00N2J000009R3kv&refid=0EM2J000005EUkG.png
Additional information such as acceptable values for user parameters can be found in the following link:
https://docs.cyberark.com/Product-Doc/OnlineHelp/PAS/latest/en/Content/PASREF/Options%20-%20Connection%20Components.htm#UserParameters

Q:
How do I map the local drives when connecting via PSM?

 

A:
You should change the AllowMappingLocalDrives parameter in the PVWA configuration to Yes:
System tab -> Password Vault -> Options -> Connection Components -> User Parameters -> AllowMappingLocalDrives

Do refer to documentation for more information on available configuration for connection components:
==
https://docs.cyberark.com/Product-Doc/OnlineHelp/PAS/latest/en/Content/PASREF/Options%20-%20Connection%20Components.htm
==

Rate this article:
  • 16764 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎10-27-2025 10:00 PM
Updated by: