PTA - Checking for supported OS installation

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

PAM Self-Hosted Articles
3 min read
L3 Networker
No ratings

The Idira documentation requires that a PTA installation:

1. Must be from a minimal OS installation
2. No additional third-party software packages can be installed before (or after) the installation except "kexec-tools".
3. Patches to the Operating System are to be performed/maintained by the customer independently of the PTA software
4. Manually partitioned with 500 GB, either as a single mount point at /, or if a CIS Hardened installation, at least 100 GB for /var/log and 200 GB for /var must be allocated.

Steps

There are four main items to check to ensure that the PTA installation is within supported requirements:

1. anaconda-ks.cfg: This file is located in the /root folder. It contains the initial installation information of the OS. The key line to check is directly under "%packages":

For example, this is an example of a correct minimal install:


%packages
@^minimal (or @^minimal-environment)
kexec-tools (optional)
 
For example, this is an example of an incompatible install:

%packages
@core
chrony
kexec-tools


The %packages line must ONLY contain @^minimal (or @^minimal-environment) and kexec-tools.

If there is any other value, then this will indicate that this was not a minimal OS installation, and the only resolution in this case would be to re-image the OS to a minimal OS and re-install PTA.

2. If there is a concern that unapproved packages were ever installed, the most recent documentation on acceptable third party packages can be found here. All packages can be listed using the command rpm -qa on supported Redhat-based distributions.

Similarly the command rpm -qa > /tmp/rpm.txt will generate a text file of all the installed packages for that machine. You can then request the /tmp/rpm.txt file.

It may be helpful to copy the anaconda-ks.cfg to the /tmp directory and the run the command chmod 444 so that the file can easily be copied via SCP. 

When troubleshooting a PTA installation, it is recommended that both the anaconda-ks.cfg as well as the output from 'rpm -qa' is requested. Detecting an unsupported installation early in the case process could decrease the case life cycle.

3. Please work with your Linux administrators for maintaining operating system packages and updates for this server. 

4. Configure the 500 GB partition manually. Note: If partitioning is left unconfigured, this will result in a "home" logical volume being provisioned with most of the 500GB space allocated to it.  If this was done, reference PTA - How to expand volume group /dev/mapper/rhel-root for additional details of how to return an automatic partitioned system back to a single mount point.

If a CIS Level 2 installation was selected during the Anaconda installation, manual partitioning/logical volume configuration must be performed in order to install. Our System Requirements specify that at least 200GB must be allocated to /var and 100 GB to /var/log.  

5. If the above requirements are confirmed, but an issue is encountered during install or operation of the PTA service, please open a Support or Escalation case to request R&D assistance to troubleshoot.

Rate this article: