PTA - How to expand volume group /dev/mapper/rhel-root

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

PAM Self-Hosted Articles
3 min read
L0 Member
No ratings

When installing RedHat Enterprise Linux through the Anaconda installer to prepare a minimal installation, where automatic partitioning/storage configuration were chosen, the 500 GB disk will be partitioned with only ~70 GB to the root volume group and mount point (under /), and the rest will be  allocated to a separate "home" volume group and mount point (under /home).

 

This impacts the system because the volume group "root" (dev/mapper/rhel-root) is the '/' directory, whereas the volume group "home" (/dev/mapper/rhel-home) is the '/home' directory, thus the entire filesystem except /home/ only has 70G of space available, a small fraction of the PTA disk requirement of 500G

Steps

---You MUST be root to perform the below steps---

1. Check the current disk status to ensure dev/mapper/rhel-root and a separate volume group rhel-home exists:
df -h

Example:

[root@ptaserver /]# df -h
Filesystem             Size  Used Avail Use% Mounted on
devtmpfs               4.0M     0  4.0M   0% /dev
tmpfs                  7.8G     0  7.8G   0% /dev/shm
tmpfs                  3.2G  9.1M  3.2G   1% /run
efivarfs               256K   56K  196K  23% /sys/firmware/efi/efivars
/dev/mapper/rhel-root   70G  1.9G   69G   3% /
/dev/nvme0n1p2         960M  193M  768M  21% /boot
/dev/nvme0n1p1         599M  7.1M  592M   2% /boot/efi
/dev/mapper/rhel-home  421G  3.0G  418G   1% /home
tmpfs                  1.6G     0  1.6G   0% /run/user/0

lvs

[root@ptaserver /]# lvs
  LV   VG   Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  home rhel -wi-ao---- 420.55g
  root rhel -wi-ao----  70.00g
  swap rhel -wi-ao----  <7.86g.



2. Stop PTA services (if installed)
service appmgr stop


3. Copy everything from the home directory out
cp -a /home /home2


4. Unmount the volume
umount /dev/mapper/rhel-home 


5. Delete the home logical volume
lvremove /dev/mapper/rhel-home 

Example: 

[root@ptaserver /]# lvremove /dev/mapper/rhel-home
Do you really want to remove active logical volume rhel/home? [y/n]: y
  Logical volume "home" successfully removed



6. Extend the root logical volume to take up the rest of the space
lvextend -l +100%FREE /dev/mapper/rhel-root (lvextend -l +100%FREE /dev/mapper/rhel-root)

Example:

[root@ptaserver /]# lvextend -l +100%FREE /dev/mapper/rhel-root
  Size of logical volume rhel/root changed from 70.00 GiB (17920 extents) to 481.12 GiB (125582 extents).
  Logical volume rhel/root successfully resized.



7. Extend the xfs partition
xfs_growfs /dev/mapper/rhel-root

Example:

[root@ptaserver /]# xfs_growfs /dev/mapper/rhel-root
meta-data=/dev/mapper/rhel-root  isize=512    agcount=4, agsize=3276800 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=0 spinodes=0
data     =                       bsize=4096   blocks=183500080, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
log      =internal               bsize=4096   blocks=6400, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
data blocks changed from 18350080 to 128595968



8. Check that /dev/mapper/rhel-root (/dev/mapper/rhel-root) has been increased in size and that the volume group /dev/mapper/rhel-home (/dev/mapper/rhel-home) has been removed
df -h

Example:

[root@ptaserver /]# df -h
Filesystem             Size  Used Avail Use% Mounted on
devtmpfs               4.0M     0  4.0M   0% /dev
tmpfs                  7.8G     0  7.8G   0% /dev/shm
tmpfs                  3.2G  9.1M  3.2G   1% /run
efivarfs               256K   56K  196K  23% /sys/firmware/efi/efivars
/dev/mapper/rhel-root  491G  4.8G  486G   1% /
/dev/nvme0n1p2         960M  193M  768M  21% /boot
/dev/nvme0n1p1         599M  7.1M  592M   2% /boot/efi
tmpfs                  1.6G     0  1.6G   0% /run/user/0

lvs

[root@ptaserver /]# lvs
  LV   VG   Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
root rhel -wi-ao---- 490.55g
  swap rhel -wi-ao----  <7.86g.


9. Move the home directory data back and remove the temporary home2 directory
mv /home2/* /home/
rmdir /home2



10. Remove the /dev/mapper/cl-home (lvremove /dev/mapper/centos-home) entry from /etc/fstab
vi /etc/fstab

DELETE the line:

/dev/mapper/rhel-home     /home                   xfs     defaults        0 0



11. Start PTA
service appmgr start


12. Run Diagnostics to ensure PTA is functioning again:
RUN_DIAGNOSTICS
 

Rate this article: