AutoIt Script for Barracuda GUI: "Failed to open process (process id: xxx)"

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

AutoIt Script for Barracuda GUI: "Failed to open process (process id: xxx)"

L3 Networker

I've created an AutoIt script to automate login to the Barracuda Firewall Admin GUI using credentials fetched from CyberArk. After numerous attempts, the script successfully connected to the Barracuda firewall and filled in the credentials on the first run.

 

However, when I try to connect again, the script fails to fill in the credentials, and I receive the error: Failed to open process (process id: xxx)

 

PS

Barracuda Admin is not a traditional installable app — it's a self-contained GUI executable. It just opens directly and allows credential entry.

When testing manually, Run() didn’t work to launch it. So I used ShellExecute() , and it worked fine.

Oddly, when running the script via CyberArk, Run() works, and the Barracuda GUI opens correctly.

However, after Barracuda opens, I get the error.

 

068Vy00000WBCufIAH.jpg 

 

Here is the script I'm using:

;=======================================

; Main

;=======================================

Func Main()

 

; Init PSM Dispatcher utils wrapper

ToolTip ("Initializing...")

if (PSMGenericClient_Init() <> $PSM_ERROR_SUCCESS) Then

Error(PSMGenericClient_PSMGetLastErrorString())

EndIf

 

LogWrite("successfully initialized Dispatcher Utils Wrapper")

 

; Get the dispatcher parameters

FetchSessionProperties()

 

LogWrite("mapping local drives")

if (PSMGenericClient_MapTSDrives() <> $PSM_ERROR_SUCCESS) Then

Error(PSMGenericClient_PSMGetLastErrorString())

EndIf

 

LogWrite("starting client application")

ToolTip ("Starting " & $DISPATCHER_NAME & "...")

$ConnectionClientPID = Run($CLIENT_EXECUTABLE)

if ($ConnectionClientPID == 0) Then

Error(StringFormat("Failed to execute process [%s]", $CLIENT_EXECUTABLE, @error))

EndIf

; Launch the application

Run($CLIENT_EXECUTABLE)

 

; Wait for the window to appear

WinWait("Barracuda Firewall Admin 9.0 - New Session", "", 30)

Sleep(3000)

 

If WinExists("Barracuda Firewall Admin 9.0 - New Session") Then

Send($TargetAddress)

Send("{TAB}")

Send($TargetUsername)

Send("{TAB}")

Send($TargetPassword)

Send("{ENTER}")

Else

  MsgBox(16, "Error", "Login window NOT found.")

EndIf

 

 

; ------------------

; Handle login here! ; CHANGE_ME

; ------------------

; Send PID to PSM so recording/monitoring can begin

; Notice that until we send the PID, PSM blocks all user input.

LogWrite("sending PID to PSM")

if (PSMGenericClient_SendPID($ConnectionClientPID) <> $PSM_ERROR_SUCCESS) Then

Error(PSMGenericClient_PSMGetLastErrorString())

EndIf

 

; Terminate PSM Dispatcher utils wrapper

LogWrite("Terminating Dispatcher Utils Wrapper")

PSMGenericClient_Term()

 

Return $PSM_ERROR_SUCCESS

EndFunc

 

;==================================

; Functions

;==================================

; #FUNCTION# ====================================================================================================================

; Name...........: Error

; Description ...: An exception handler - displays an error message and terminates the dispatcher

; Parameters ....: $ErrorMessage - Error message to display

;  $Code - [Optional] Exit error code

; ===============================================================================================================================

Func Error($ErrorMessage, $Code = -1)

 

; If the dispatcher utils DLL was already initialized, write an error log message and terminate the wrapper

if (PSMGenericClient_IsInitialized()) Then

LogWrite($ErrorMessage, True)

PSMGenericClient_Term()

EndIf

 

Local $MessageFlags = BitOr(0, 16, 262144) ; 0=OK button, 16=Stop-sign icon, 262144=MsgBox has top-most attribute set

 

MsgBox($MessageFlags, $ERROR_MESSAGE_TITLE, $ErrorMessage)

 

; If the connection component was already invoked, terminate it

if ($ConnectionClientPID <> 0) Then

ProcessClose($ConnectionClientPID)

$ConnectionClientPID = 0

EndIf

 

Exit $Code

EndFunc

 

; #FUNCTION# ====================================================================================================================

; Name...........: LogWrite

; Description ...: Write a PSMWinSCPDispatcher log message to standard PSM log file

; Parameters ....: $sMessage - [IN] The message to write

;         $LogLevel - [Optional] [IN] Defined if the message should be handled as an error message or as a trace messge

; Return values .: $PSM_ERROR_SUCCESS - Success, otherwise error - Use PSMGenericClient_PSMGetLastErrorString for details.

; ===============================================================================================================================

Func LogWrite($sMessage, $LogLevel = $LOG_LEVEL_TRACE)

Return PSMGenericClient_LogWrite($LOG_MESSAGE_PREFIX & $sMessage, $LogLevel)

EndFunc

 

; #FUNCTION# ====================================================================================================================

; Name...........: PSMGenericClient_GetSessionProperty

; Description ...: Fetches properties required for the session 

; Parameters ....: None

; Return values .: None

; ===============================================================================================================================

Func FetchSessionProperties() ; CHANGE_ME

if (PSMGenericClient_GetSessionProperty("Username", $TargetUsername) <> $PSM_ERROR_SUCCESS) Then

Error(PSMGenericClient_PSMGetLastErrorString())

EndIf

 

if (PSMGenericClient_GetSessionProperty("Password", $TargetPassword) <> $PSM_ERROR_SUCCESS) Then

Error(PSMGenericClient_PSMGetLastErrorString())

EndIf

 

if (PSMGenericClient_GetSessionProperty("Address", $TargetAddress) <> $PSM_ERROR_SUCCESS) Then

Error(PSMGenericClient_PSMGetLastErrorString())

EndIf

EndFunc

 

 

 

 

Has anyone faced a similar issue or can help identify what might be going wrong?

Any insights or suggestions would be greatly appreciated!

13 REPLIES 13

L5 Sessionator

I would recommend removing the duplicate of running the client executable. most probably the application doesn't support multiple instances and therefore you receive the error. try removing the part below and rerun again:

 

; Launch the application

Run($CLIENT_EXECUTABLE)

 

068Vy00000WB95cIAD.jpg

L4 Transporter

Hello @Bellatrix Lestrange​ 

 

Have you received an answer to your question? If so, we kindly encourage you to share it with us.

Your insights could be valuable to other community members in the future.

 

Thank you, Isar.

L3 Networker

Changed the script and it worked.

 

Global Const $DISPATCHER_NAME = "PSMBarracuda"

Global Const $CLIENT_EXECUTABLE = "C:\Tools\FirewallAdmin_9.0.0-277.exe"

Global Const $ERROR_MESSAGE_TITLE = "PSM " & $DISPATCHER_NAME & " Dispatcher Error"

Global Const $LOG_MESSAGE_PREFIX = $DISPATCHER_NAME & " Dispatcher - "

 

Global $TargetAddress, $TargetUsername, $TargetPassword

Global $ConnectionClientPID = 0

 

Exit Main()

 

Func Main()

  If (PSMGenericClient_Init() <> $PSM_ERROR_SUCCESS) Then

    Error(PSMGenericClient_PSMGetLastErrorString())

  EndIf

 

  FetchSessionProperties()

 

  If (PSMGenericClient_MapTSDrives() <> $PSM_ERROR_SUCCESS) Then

    Error(PSMGenericClient_PSMGetLastErrorString())

  EndIf

 

  ShellExecute($CLIENT_EXECUTABLE) ; Launch app normally

 

  ; Wait for login window

  WinWait("Barracuda Firewall Admin 9.0 - New Session", "", 20)

  Local $hWnd = WinGetHandle("Barracuda Firewall Admin 9.0 - New Session")

  If $hWnd = 0 Then Error("Login window NOT found.")

 

  Sleep(1000)

 

  ; Get actual process PID of the GUI

  $ConnectionClientPID = WinGetProcess($hWnd)

 

 

  If $ConnectionClientPID = 0 Then

    Error("Could not get PID of the GUI process.")

  EndIf

 

  ; Fill credentials

  WinActivate($hWnd)

  Send($TargetAddress)

  Send("{TAB}")

  Send($TargetUsername)

  Send("{TAB}")

  Send($TargetPassword)

  Send("{ENTER}")

L5 Sessionator

@Bellatrix Lestrange​ , please be aware that in your changed script, you don't send the PID to the PSM and it will cause session not being monitored and recorded.

 

I would include the following to capture the session before filling credentials:

 

 

LogWrite("sending PID to PSM")

if (PSMGenericClient_SendPID($ConnectionClientPID) <> $PSM_ERROR_SUCCESS) Then

Error(PSMGenericClient_PSMGetLastErrorString())

EndIf

Thank You! But whenever iam trying to give PID it throws error- "PSMSR163E failed to open process( process id: xxxxxx)"

L5 Sessionator

Some generic questions related to the environment:

 

  1. Do you compile this script to exe file and run as exe or you invoke it via Autoit?
  2. Is PSM hardened? If so, are web applications hardened?
  3. Is applocker turned on and in enforced mode? If so, have you added Autoit or your compiled exe to the applocker rule to be whitelisted?

 

 

  1. Autoit
  2. Yes & Yes
  3. Audit Mode

But without sending PID, connector works fine. right?

Yes

strange. Better to turn on trace mode fo Connnection Client Settings and the PSM itself and debug this connection. there should definitely be something that points out to the reason

L7 Applicator

Hi @Bellatrix Lestrange​ 

 

Have you whitelisted Barracuda executable from AppLocker rules ?

 

And sometimes the window is present, but its process is still initializing or loading its dependencies.

 

Try adding a longer delay after WinWait()

 

Hope it helps !

 

As of now the session is recording.

what made it working?

  • 234 Views
  • 13 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!