CyberArk cannot open remote target ip via html5

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

CyberArk cannot open remote target ip via html5

L1 Bithead

Dear all,

 

be currently trying to open remote target ip via html5, and this is the result

Field_Content_versions_oct20__068Vy00000ieNeBIAU.png 

[31/07/2025 | 23:31:30] | :: | PSMSR035I Privileged Session Manager version [12.2.4.9] is up

[31/07/2025 | 23:49:29] | :: | PSMSR823W [bb028fed-6716-47be-880f-e01efebe4fb5] PSM does not support more than one audit capability for the same connection component. The generic "Keystrokes Audit" capability will be ignored (connection component: [PSM-PaloAltoWeb]).

[31/07/2025 | 23:49:29] | :: | PSMSR833W [bb028fed-6716-47be-880f-e01efebe4fb5] PSM does not support more than one text recorder capability for the same connection component. The universal "Keystrokes Text Recorder" capability will be ignored (connection component: [PSM-PaloAltoWeb]).

 

Is there any way you can help with this case?

 

 

3 REPLIES 3

L4 Transporter

This issue could be related to following

 

1- Connectivity between HTML gateway and PSM (including load balancer) should be opened on port 3389

2- Connectivity between HTML gateway and PVWA(including load balancer) should be opened on port 443

3- Make sure PSM services are running and able to make connection without Gateway

5- PSM certificate chain installed on HTML gateway while deploying

 

If all looks fine atlast purge the container and redeploy

L4 Transporter

This issue could be related to following

 

1- Connectivity between HTML gateway and PSM (including load balancer) should be opened on port 3389

2- Connectivity between HTML gateway and PVWA(including load balancer) should be opened on port 443

3- Make sure PSM services are running and able to make connection without Gateway

5- PSM certificate chain installed on HTML gateway while deploying

 

If all looks fine atlast purge the container and redeploy

L7 Applicator

Hi @Nugroho Apriryanto​ 

 

Its the PSM that connects to target host and not HTML5 GW.

 

Please check the connectivity to target host from PSM server(s).

 

Also check connectivity between HTML to PSM is working fine.

 

Check the Guacd service on HTML5 and PSM service are working fine.

 

Also refer to the following KBs

 

https://community.cyberark.com/s/article/PSMGW0008E-error-after-setting-the-TargetCommunication-TLS

 

https://community.cyberark.com/s/article/Docker-HTML5-PSMGW0008E-error

 

 

 

Hope it helps !

  • 181 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!