Getting error for root account.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

Getting error for root account.

L4 Transporter

First login - Failed to verify user after switching. code: 8008 The CPM is trying to verify this password because its status matches the following search criteria: ResetImmediately.

 

All other accounts are working fine as i am able to verify and reconcile them. But just for root i am getting this error.

1 accepted solution

Accepted Solutions

In this case, you can also try changing the prompts in platform config files to accommodate the correct prompt.

Thanks,

View solution in original post

23 REPLIES 23

L4 Transporter

Could you share with us the logs? I once had this issue when id=0 was set for a different account that root.

L4 Transporter

EXECUTION STACK

===============

2019/02/12 12:36:39 0: STATE="Init" ACTION="set verifyLogon 0; set curr_pass "<pmpass>";set whoami "whoami"; set useSSHKey "0"" CONDITION="TRUE" NEXTSTATE="CheckProtocol" DURATION=2ms

2019/02/12 12:36:39 1:  STATE="CheckProtocol" ACTION="" CONDITION="ProtocolIsSSH" NEXTSTATE="SSHCheckAction" DURATION=1ms

2019/02/12 12:36:39 2:   STATE="SSHCheckAction" ACTION="" CONDITION="ActionIsVerify" NEXTSTATE="SSHCheckExtraPass" DURATION=2ms

2019/02/12 12:36:39 3:    STATE="SSHCheckExtraPass" ACTION="" CONDITION="ExtraPassExists" NEXTSTATE="ExtraPassSSHCheckManagementType" DURATION=3ms

2019/02/12 12:36:39 4:     STATE="ExtraPassSSHCheckManagementType" ACTION="" CONDITION="ExtraPassManagementTypeIsPassword" NEXTSTATE="StartSessionSSH" DURATION=1ms

2019/02/12 12:36:39 5:      STATE="StartSessionSSH" ACTION="bin\\plink.exe <address> -ssh -P <port>" CONDITION="Login" NEXTSTATE="CheckInitAction" DURATION=1873ms

2019/02/12 12:36:41 6:       STATE="CheckInitAction" ACTION="" CONDITION="ActionIsVerify" NEXTSTATE="CheckExtraPass" DURATION=2ms

2019/02/12 12:36:41 7:        STATE="CheckExtraPass" ACTION="" CONDITION="ExtraPassExists" NEXTSTATE="LoginExtraCheckAuthType" DURATION=3ms

2019/02/12 12:36:41 8:         STATE="LoginExtraCheckAuthType" ACTION="" CONDITION="IsNotConnectWithSSHKeys" NEXTSTATE="LoginExtraUser" DURATION=1ms

2019/02/12 12:36:41 9:          STATE="LoginExtraUser" ACTION="<extrapass1\username>" CONDITION="Password" NEXTSTATE="LoginExtraPass" DURATION=2588ms

2019/02/12 12:36:44 10:           STATE="LoginExtraPass" ACTION="<pmextrapass1>" CONDITION="StandardPrompt" NEXTSTATE="SwitchUser" DURATION=3896ms

2019/02/12 12:36:47 11:            STATE="SwitchUser" ACTION="su - <username>" CONDITION="Password" NEXTSTATE="SwitchPass" DURATION=2654ms

2019/02/12 12:36:50 12:             STATE="SwitchPass" ACTION="$curr_pass" CONDITION="SuWrongPassword" NEXTSTATE="FailTARGETInvalidUsernameOrPassword" DURATION=3082ms

 

 

Machine is AIX and whlile verifying i am getting error :The Password was marked for reconciliation. Code: 2114, Error: Invalid username or bad password. code: 2114  

L4 Transporter

Can you logon with the specified credentials onto the target system through putty? Have you configured a logon account or root account? I dont know about you genius but "Invalid username or bad password" seems pretty straight forward to me so this means NOT synced up.

Also, share the last lines for every log.

Thanks your response. I have updated the pwd so "Invalid username or bad password" is not there but i am getting "First login - Failed to verify user after switching. code: 8008". Please suggest.

Console logs:

send: sending "uname\r" to { exp4 } 

uname

AIX

[1msvwprd1b.svwprd1b.CDCDPOSPAPZP01> (B[m(/svw/svwprd1b/work/svwprd1b)

$ 

*****************************************************************

2019/02/13 12:07:09 (-423564190) STATE: VerifySwitch

*****************************************************************

 

 

send: sending "whoami\r" to { exp4 } 

whoami

svwprd1b

[1msvwprd1b.svwprd1b.CDCDPOSPAPZP01> (B[m(/svw/svwprd1b/work/svwprd1b)

$ 

*****************************************************************

2019/02/13 12:07:11 (-423562412) STATE: FAILVerifySwitch

*****************************************************************

Hi Imath thanks for all your help !

I have identified the root cause and issue is resolved now.

L3 Networker

​What was it ? the root cause ?  because i have the same issue with a redhat server

 

I was getting to the wrong prompt on server....please login locally and see if you are getting the correct prompt. Also the servers were single view servers.

L4 Transporter

Even I got the same error and it turned out to be a Case sensitivity on Target host.

Target host accepted 'admin' as correct username and able to verify/change and 'Admin' as incorrect username and gave access denied error.

Do we need to login locally from CPM server using logon account..? and let me know what needs to checked after logging in locally..?

 

Are you getting same issue ?

If yes then try to login locally and see you are getting correct prompt.

Yeah, I'm also getting same error.

logged in locally and getting correct prompt.

 

In this case, you can also try changing the prompts in platform config files to accommodate the correct prompt.

Thanks,

  • 1 accepted solution
  • 2411 Views
  • 23 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!