How do TeraTerm Client access to PSMP Server?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

How do TeraTerm Client access to PSMP Server?

L1 Bithead

Hi All, how do TeraTerm Client access to PSMP Server. we tested PSMP Server working on Putty but not Tera Term Client. ssh username@targetaccount#domainname@targetdevice@PSMPAddress

 

Any other setting need to configure?

 

 

Regards,

DV

1 accepted solution

Accepted Solutions

Hi @Liad Domb​ ,

 

The issue is resolved now. The connection has been established with the provided string on Tera Term application. The only change we made was selecting Keyboard-interactive as an authentication method for successful authentication to target machine which resolved authentication failure issue.

 

Thanks,

DV

View solution in original post

7 REPLIES 7

L7 Applicator

To access a PSMP (Privileged Session Management Proxy) Server using TeraTerm, you need to follow a specific command syntax. Here’s a general guide:

  1. Open TeraTerm: Launch the TeraTerm application on your workstation.
  2. Connect via SSH: Use the SSH protocol to connect to the PSMP server. The command syntax typically looks like this:
  3. ssh -l <vaultuser>@<targetuser>@<targetmachine> <PSMPAddress>
  4.  
  • vaultuser: The name of the Vault user.
  • targetuser: The account name on the target system.
  • targetmachine: The address of the target system (IP or DNS).
  • PSMPAddress: The IP address or DNS of the PSMP server.
  1. Authentication: You will be prompted to enter the password for the Vault user. Ensure that the authentication method is set correctly (e.g., Keyboard Interactive).
  2. Session Management: Once authenticated, the PSMP server will establish a connection to the target machine using the provided credentials.

 

 

 

 

 

https://docs.cyberark.com/pam-self-hosted/11.4/en/Content/PASIMP/Accessing-Target-Machines-through-PSMP-Appendix.htm

Thanks @Robert Stothard​ for the solution. Perhaps, I tried to use the above string but it is throwing error as invalid host.

After launching tera term application, what do I need to specify under host and username field?

 

L7 Applicator

When using Tera Term via CyberArk PSMP (Privileged Session Management Proxy), you need to specify the following:

  • Host: Enter the PSMP Proxy Server address. This is typically the address of the CyberArk PSMP server that you are connecting through.
  • Username: Use the format 
  • vaultuser@targetuser#domainaddress@targetmachine
  • . This string includes:vaultuser
    • : Your CyberArk Vault username.
  • targetuser
    • : The username for the target system.
  • domainaddress
    • : The domain address of the target system.
  • targetmachine
    • : The address of the target machine.

For example, if your Vault username is 

admin

 

, the target username is 

user1

 

, the domain address is 

example.com

 

, and the target machine address is 

192.168.1.1

 

, you would enter 

admin@user1#[email protected]

 

 

@Robert Stothard​ I have tried the same string shared by you. Unfortunately, it is still not working in case of TeraTerm.

However, it is working fine with other native clients like SecureCRT, Putty etc.

Please assist if you have any other solution to make it accessible via Tera Term as well.

Hi @Divya Verma​ 

 

As the community has not yet provided an answer to this question for some time, could you kindly share if you were able to resolve the issue, and how?

Your solution could help other community members who may face a similar issue.

 

If the issue is still relevant, I would advise raising a ticket with our Support team for further assistance.

 

Thanks, Liad.

Hi @Liad Domb​ ,

 

The issue is resolved now. The connection has been established with the provided string on Tera Term application. The only change we made was selecting Keyboard-interactive as an authentication method for successful authentication to target machine which resolved authentication failure issue.

 

Thanks,

DV

Hi @Divya Verma​ ,

 

Thank you for the update,

I'm happy that the issue is resolved.

 

Best Regards, Liad.

  • 1 accepted solution
  • 461 Views
  • 7 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!