- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
12-03-2025 08:11 AM
Hi,
I have been trying to install and configure HTML 5 GW using RPM and am following the instructions from below official document. The steps I have followed and completed are as follows:
1) Installed Apache Tomcat and tested on port 8080
2) Enabled firewalled to forward the port from 443 to 8443
3) Received all server, root and intermediate certificate from the CA and concatenated to p12 format and transferred to JKS store and associated in server.xml file.
Now, I am not able to launch secure tomcat browser after these steps, and I get below error.
My Server.xml is like below:
<Connector port="8443" protocol="org.apache.coyote.http11.Http11NioProtocol"
maxThreads="150" SSLEnabled="true" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" keystoreFile="/opt/tomcat/keystore/tomcat.jks" keystorePass="iamthepasswd" />
<!-- A "Connector" using the shared thread pool--> <!-- APR connector and OpenSSL support using Tomcat Native -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />These above two are the changes I have made and commented out the section which belonged to port 8080.
Have a look for firewalld configuration for drop zone.
drop (active)
target: DROP
icmp-block-inversion: no
interfaces: eth0
sources:
services: https ssh
ports:
protocols:
forward: no
masquerade: yes
forward-ports:
port=443:proto=tcp:toport=8443:toaddr=
source-ports:
icmp-blocks:
rich rules:I am suspecting on forward set as "No", but is there any possible ideas to set to "Yes" in drop zone?
Also, tomcat.service and tomcat status is Running
Install PSM HTML5 Gateway using an RPM package | CyberArk Docs
12-03-2025 02:30 PM
Solution:
I had concatenated Certificates in wrong way. I had to skip server certificate while concatenating and then generate p12. Now, it's fine.
12-03-2025 12:03 PM
Hi @sanjay sah
Please try by changing forward: no to forward: yes. Thats because when forward is set to no firewalld service acts as a firewall and drops any packet intended to be forwarded.
Hope it helps !
12-03-2025 12:47 PM
How to setup that. I tried finding in the google but could not find it however I am pretty sure forwarding should be no as default. Just for testing purpose I want to know how to enable it
12-03-2025 02:30 PM
Solution:
I had concatenated Certificates in wrong way. I had to skip server certificate while concatenating and then generate p12. Now, it's fine.
12-03-2025 03:08 PM
Great ! Thanks for sharing @sanjay sah
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

