HTML5GW installation: When navigating to https://html5gwip/guac/direct?hostname=psmserverip using internet explorer, page shows HTTP Status 401 - Unauthorized

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

HTML5GW installation: When navigating to https://html5gwip/guac/direct?hostname=psmserverip using internet explorer, page shows HTTP Status 401 - Unauthorized

L4 Transporter

0682J000005j0F1QAI.jpgHi All,

 

Has anyone encountered the above mentioned error when installing HTML5GW?

I have made sure the following is in place:

  • tomcat service is running on html5gw server
  • guacd service is running on html5gw server
  • firewalld service is running on html5gw server
  • When navigating to https://html5gwip, the tomcat page appears.
  • Port 443 is open from client to html5gw server and port 3389 is open from html5gw server to psm server.
  • NLA is disabled on psm server.
  • Have also set the security layer on the psm server to RDP. ( have edited the relevant registry on the psm server.)

 

Attaching a snapshot of the error.

 

Thank you.

 

Best Regards,

Sherice Ching

10 REPLIES 10

L4 Transporter

Hello Sherice,

 

Do you have RSA on this server? Sometimes we see this kind of behavior in conjunction with incorrect RSA settings, but I'd have to see how they apply to the gateway.

 

Thank you,

Sarah

L4 Transporter

Hi @Sarah Stern​ , I do not have a RSA on this server. I was just testing the installation of html5gw using a fresh centos installation.

Did you fixed it?

Hi @Nhien Le​ , it seems like it is quite a common issue to see this error when manually navigating https://html5serverip/guac/direct?hostname=psmserverip.

What you can do is to add this html5gw server onto CyberArk and test a psm connection via CyberArk. It will work.

 

Thank you.

I tested connecting via PSM, the new tab disappear after seconds. Can you advice?

did you configure the html5gw server on the pvwa web portal properly?

Yes i do, following the guide.

L3 Networker

Did someone ever fix this? I get the same error. CentOS7 / Tomcat 8.5.54

L2 Linker

I have the same problem. My LAB is CyberArk 11.4,

Any solution to fix?0682J000009n6L1QAI.jpg

 

L3 Networker

As stated by someone else it will work. There is no connection active on the psm/guac side at that time, maybe that's why it's reporting in Tomcat "Unauthorized". But it will work if configured correctly both on PVWA and HTML5GW.

I have a working HTML5GW combined with PSMP on v11.3 and get the same "error".

  • 690 Views
  • 10 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!