- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
10-16-2024 09:33 PM
Hello, CyberArk community!
I have installed and configured the PTA version 14.2.1 in my test environment. The configuration was done by the run.sh script. The Linux machine that I am using is Rocky 9 with 8 GB ram and 50 GB disk. I don't want to give the machine 16 GB RAM and hope this is not the problem.
So, when I finished the configuration and went to to the system health, I saw that the PTA is not configured, then I went troubleshooting, ran diagnostics, I had server fails there, most of them I fixed right away and they were never popping off again, but some of them persist popping off after I do the service appmgr restart and RUN_DIAGNOSTICS:
this is my current systemparm.properties file:
I tried re-running the vault configuration and I was not getting any errors during that step and after running the RUN_DIAGNOSTICS the "please re-run vault config" issue was gone. In fact I had all fail messages gone once and still didn't have my PTA as connected in the PVWA system health page.
I checked if my ports 514 and 11514 are open with netstat and ss:
So, I am out of ideas what else I have to change or check, can someone please help?
Update:
I went to Security tab and I saw this:
Then I decided to re-run the vault configuration and configure the secure connection with the PVWA and I was not able to get it:
It's most probably the issue with the certificate because I never uploaded or generated any certificates on any of the components of my test CyberArk environment, is there any way to configure PVWA and PTA have unsecure connection just to get it to work?
10-17-2024 12:48 AM
There is! I was able to find it: https://docs.cyberark.com/pam-self-hosted/latest/en/content/pta/configure_pta-pvwa_trusted_connection.htm
Then running the vaultPermissionsValidation.sh script solved the issue:
10-16-2024 11:53 PM
is there any way to configure PVWA and PTA have unsecure connection just to get it to work?
The simple answer is No. The communication between PTA and PVWA happens only through secure channel. You need to have certs installed to have the connectivity between PTA & PVWA.
10-17-2024 12:48 AM
There is! I was able to find it: https://docs.cyberark.com/pam-self-hosted/latest/en/content/pta/configure_pta-pvwa_trusted_connection.htm
Then running the vaultPermissionsValidation.sh script solved the issue:
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

