Radius Troubleshooting tips

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

Radius Troubleshooting tips

L1 Bithead

Hi All,

I am integrating Radius with a self hosted Vault v14.2. Looking for advice on how to prove there is integration between the Vault and Radius. The Vault is configured as per CyberArk documentation. When I start the Vault there are no errors. There are also no information messages to confirm the Vault has successfully connected to Radius.

The authentication has been enabled on the PVWA, but I get authentication error when choosing Radius and entering user details.

Is there any Debug settings/Logs that can be recommended ?

3 REPLIES 3

L4 Transporter

Hi @Kevin Harvey​,

 

After an unsuccessful authentication, check the italog on the vault for details.

 

Since this is a new integration check the below points as well.

  • Make sure you have changed the authentication method of the respective user into Radius.
  • Make sure Radius parameters are correctly specified in the dbparm file.
  • Make sure secret file exists on the vault.
  • Make sure port 1812 is opened between the Radius server and the Vault

 

If the issue persists, share the error you are getting during authentication.

L1 Bithead

Hi Uditha A,

 

Thanks for your response.

Yes I have checked all of the points that you have listed.

 

We have since identified a connectivity issue that was preventing the vault communication to Radius.

In this situation I would expect an error message when the Vault starts highlighting it cannot connect. There are no messages in the ITALOG, not even in the trace*.d files. I couldn't find any trace settings that would highlight this either.

Hi,

I don't think so you will get an that kind of message without trying to make a connection. Check the vault server's windows firewall rules for a rule that applied for port 1812 and radius server's IP.

 

If yes, better the check from the network level.

  • 48 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!