- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
09-02-2025 09:13 PM
I can see the DR_FALLBACK user type but would like to know the best procedure to implement a separate DR user so that we do not have to continually re-create credential files when we DR.
09-03-2025 01:41 AM
Basic procedure is here to create the user .
https://docs.cyberark.com/pam-self-hosted/latest/en/content/pas%20inst/disaster-recovery-installation.htm#ConfiguretheDRuseronthePrimaryVault
If you haven't already installed disaster recovery on the primary vault , install it
https://docs.cyberark.com/pam-self-hosted/latest/en/content/pas%20inst/disaster-recovery-installation.htm#InstalltheDisasterRecoveryapplication
If you already had it installed , create the Credential file, update padr.ini with user name and path to Credential file
https://docs.cyberark.com/pam-self-hosted/latest/en/content/pasref/disaster%20recovery%20vault%20parameter%20file.htm
09-03-2025 12:14 AM
Hi,
This happens due to self password change of this user due to native Cyberark password management of application users. The reason why you always re-create credential file after failover failback is that user password is being changed on one vault but not synchronized to another vault causing authentication failure.
09-03-2025 01:41 AM
Basic procedure is here to create the user .
https://docs.cyberark.com/pam-self-hosted/latest/en/content/pas%20inst/disaster-recovery-installation.htm#ConfiguretheDRuseronthePrimaryVault
If you haven't already installed disaster recovery on the primary vault , install it
https://docs.cyberark.com/pam-self-hosted/latest/en/content/pas%20inst/disaster-recovery-installation.htm#InstalltheDisasterRecoveryapplication
If you already had it installed , create the Credential file, update padr.ini with user name and path to Credential file
https://docs.cyberark.com/pam-self-hosted/latest/en/content/pasref/disaster%20recovery%20vault%20parameter%20file.htm
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

