Adding new devices to Panorama

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Adding new devices to Panorama

L1 Bithead

Hi

I need to add new pair of devices (PA 3220) as HA active/passive mode which will be replacing the existing PA 3060 HA cluster which is in production.  I am going to use the same device group, but I would like to rename the template and utilize the same parameters as the original.  I was thinking about cloning the template and pushing that to the new devices or should just add them to the existing template stack and then rename the template?  Not sure what the best approach is.

 

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Thank you for the post @Amin2

 

Both options will work, but given condition that new PA-3220 is going to replace existing PA-3060 utilizing the same Template configuration, placing PA-3220 into the same Template Stack and renaming Template seems less work/less error prone and better option to me.

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.

View solution in original post

2 REPLIES 2

Cyber Elite
Cyber Elite

Thank you for the post @Amin2

 

Both options will work, but given condition that new PA-3220 is going to replace existing PA-3060 utilizing the same Template configuration, placing PA-3220 into the same Template Stack and renaming Template seems less work/less error prone and better option to me.

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.

L0 Member

Hi, I am adding my new device PA-5420 to the existing device group that manages the 5600 Series Firewall (Multiple Vsys and VR's) in production. While attempting to push the template, it fails(attached error FYR). However, when I manually configure the interfaces, zones, and virtual routers on the new firewall, the commit is successful. Is this manual configuration necessary? I am creating interface names, IP addresses, zones, and all routing details manually. 

  • 1 accepted solution
  • 2006 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!