Change Name of active Zones or Replace

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Change Name of active Zones or Replace

L0 Member

Hi,

 we want to change the name from some active Zones that are active in policies. If we change the name than panormama display an error message.

 

Is it possible and how, to change the name of a Zone oder replace it with a new one with the new name?

1 REPLY 1

L4 Transporter

Hello @Schwarzer 

If you change the name of the Zone in panorama, it will (at least that's my experience from ~1 year ago) change all and every object with the same name. Even if this is OK for you, you might end up with the situation that "device groups" and "templates" are not installed at exactly the same time. Policies require a zone which does not yet exist, or interface is bound to a zone where no rule has this zone listed (hence not granting traffic).

We created a new zone with the new name, added this zone to all rules where required and pushed the config to the firewalls. Once this was done we replaced the zone on the interface(s) and pushed again.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!