03-14-2023 10:43 AM
Hi all,
Recently, our Panorama instance failed on us and I'm having to rebuild the VM from scratch.
I've gone through all setup and ensured licenses applied to Panorama. I am trying to now re-add one of our client firewalls, but it will not connect. I have checked traffic for port 3978, applied device certificate to Panorama, checked MGMT settings on both sides, committed changes on both sides, and still having no luck. Not sure what else to do to get the firewall to connect. Please help.
Many thanks,
Jared
03-14-2023 02:59 PM
Hello @JaredBaglietto
thank you for post!
There could be many things causing this. As a starting point, could you please check logs on Panorama from CLI: tail lines 500 mp-log configd.log? Search for Serial Number of the Firewall having an issue. This should give more details. If you spot anything related to "SC3" error, please use this KB for recovery. Alternatively, could you post an error you are seeing in the log?
Also, could you please confirm the PAN-OS version on Panorama as well as on Firewall side?
Thank you
Pavel
03-15-2023 04:53 AM
Hi Pavel,
Many thanks for your reply. The CLI has proven unresponsive as well. Suspect at this rate the Panorama has gone corrupt, so have opened a ticket with support. Many thanks anyway.
Jared
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
