Migration from Panorama M-500 to M-700 - Feedback/Input

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Migration from Panorama M-500 to M-700 - Feedback/Input

L1 Bithead

I am in the process of planning the best way to approach my Migration from Panorama M-500s to Panorama M-700s.  

 

I currently have 2 Panorama M-500s in HA, and 2 M-500s as dedicated log collectors.

 

I have my M-700s setup in the DCs and trying to figure out the best and easiest way to get this migration completed. The 700s Panoramas now have different IPs so that I can get to them and do some of the initial configuration.

 

I have my Intermediate Virtual Appliance up as well.  That I will use b/c you cant migrate directly from m-500 to m-700.

 

1.) on the day of migration, should I just shut down the m-500 Pans and import the config to the m-700s, that way it update the mgt ip and all config to that of the m-500s?

 

2.) or should I edit the named-config.xml to keep the different ip on the m-700s?  but I would have to do alot of backend work with updating in alot of places to the new Panorama IPs.

 

If anyone could provide the experience with their migration, it would be greatly appreciated.  Thanks.

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Hello @JRichardson2

 

thank you for post!

 

I have done similar migration in the past and have written post about it: Panorama migration from M-100 to M-200 and I have commented one migration post as well: Panarama migration M-100 to M-200. Even though both posts are related to different Panorama model and older PAN-OS version the logic and migration remains the same. Could you please review these posts to see it can help you?

 

Coming back to your post, personally I prefer option No.1. It is less work and easier roll back to re-use the same IP addresses.

 

Kind Regards

Pavel 

Help the community: Like helpful comments and mark solutions.

View solution in original post

2 REPLIES 2

Cyber Elite
Cyber Elite

Hello @JRichardson2

 

thank you for post!

 

I have done similar migration in the past and have written post about it: Panorama migration from M-100 to M-200 and I have commented one migration post as well: Panarama migration M-100 to M-200. Even though both posts are related to different Panorama model and older PAN-OS version the logic and migration remains the same. Could you please review these posts to see it can help you?

 

Coming back to your post, personally I prefer option No.1. It is less work and easier roll back to re-use the same IP addresses.

 

Kind Regards

Pavel 

Help the community: Like helpful comments and mark solutions.

L1 Bithead

@PavelK Thank you for your response.  That really helps!

  • 1 accepted solution
  • 344 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!